The electronic fence system is mainly composed of three parts: the electronic fence host, the front-end accessories, and the back-end control system. Usually, the electronic fence host is generally installed in an outdoor stainless steel rainproof box, and is installed along the original wall (such as a brick wall, cement wall or iron fence). The pulse host is also usually outdoors, and the alarm signal is transmitted to the Backend control center.
The electronic fence is designed to create a circuit when touched by a person or animal, and the circuit combined by the EI PCB Transformer and the circuit board converts the power into a short high-voltage pulse. One terminal of the power exciter releases a pulse of electricity approximately once per second along the connected bare wire. The other terminal is connected to a metal rod implanted in the earth, called a ground rod or ground rod. A person or animal touching the wire and the earth during the pulse will complete the circuit and will cause the pulse, causing an electric shock. The impact of a shock depends on the voltage, the energy of the pulse, the degree of contact between the recipient and the fence and ground, and the path the current takes through the body; it can range from barely noticeable to uncomfortable, to painful and even fatal.
Our common electronic fences include: pulse electronic fence, tension electronic fence, and mobile phone electronic fence (GPS electronic fence). Strictly speaking, only pulse electronic fences really belong to the security intrusion alarm system.
Jiangsu Tianwang Solar Technology Co., Ltd. has 32 years of professional development, design and manufacture of various Encapsulated Transformers, including electric fence transformer, high frequency transformer and so on.
